Coating Systems

Polished Concrete

No coating at all. We grind, densify, and polish the slab until the concrete itself is the finished floor.

Request a Site Walkthrough Call 817-203-4221

How polishing works

Polished concrete isn't applied. It's produced.

We run progressively finer diamond abrasives across the slab, and partway through we apply a chemical densifier that reacts with the concrete and hardens it from within. Then we keep refining until the surface reaches the gloss level you specified.

The result is a floor with nothing on top of it. Nothing to peel, nothing to delaminate, nothing to recoat.

Why facilities choose it

It's the longest-lived floor we install

With no coating to fail, the failure modes that affect every other system simply don't apply.

Maintenance is a scrubber and water

No stripping, no waxing, no recoat cycle. For a facility manager tracking cost per square foot over ten years, this is usually the whole argument.

It reflects light

A polished slab bounces overhead light back into the space. In a warehouse that can measurably reduce lighting cost.

It handles forklifts

Hard-wheel traffic that would eventually wear through a coating is running on hardened concrete instead.

Polished concrete floor in a large retail space reflecting the overhead light grid — The whole ceiling grid, mirrored in the slab. That reflected light is free lighting.

Where polish works best

Most of our polish work is commercial. See how we phase and schedule it on the commercial flooring page.

Commercial Projects

Crew running a floor burnisher across a concrete slab during a polishing job — Mid-polish. The finish is produced by the machine, not applied out of a bucket.

Polished concrete aisle in a manufacturing plant with green and yellow safety striping — Manufacturing aisle with safety striping laid into the floor.

What determines the result

Polish depends on your existing slab more than any other system, because the slab is the finish.

Aggregate exposure

Grind shallow and you keep a cream finish with little stone showing. Grind deeper and you expose sand or full aggregate for a terrazzo-like look. We decide together, driven partly by how the slab was originally poured.

Slab hardness and condition

Soft or heavily damaged concrete takes polish differently. We assess before we quote.

Gloss level

From matte satin to full reflective. Higher gloss means more passes and more cost.

The honest limitation. Polish shows the slab's history — old patches, previous saw cuts, embedded debris, color variation. On a slab with a rough past that can read as character, or as damage, depending on the slab and your expectations. We'll walk it with you and tell you which one you're going to get before you commit. If the floor needs to look uniform and the slab won't cooperate, a coating is the better answer.

Common questions

Is polished concrete slippery?

A clean polished floor typically tests comparable to or better than many finished surfaces — high gloss doesn't automatically mean low traction. Water on any hard smooth floor is a hazard, so we specify a traction treatment where floors get wet.

Can you polish our warehouse without shutting us down?

Usually. We phase by section or bay and work nights and weekends. Details on the commercial page.

What if my slab already has coating on it?

It has to come off first. We'll test adhesion and tell you what removal involves before we quote.